USA 1 Usa-proto Dalton Cam Arm Weights Carbide Slugs Tunsten Sidewinder Cat Proto

( Brand: Usa 1 ), ( Manufacturer Part Number: USA-PROTO ), ( Part Type: Cam Arm ), ( Country/region Of Manufacture: Unknown )

Review USA 1 Dalton Cam Arm Weights Carbide Super Slugs Tunsten Yamaha Sidewinder Polaris Cat Proto

The Dalton Cam Arm Weights Carbide Slugs, designed specifically for Yamaha Sidewinder, Polaris, Cat, and Proto snowmobiles, are an essential upgrade for any serious sledder. These weights are meticulously crafted from high-density tungsten, a material known for its exceptional density and durability. This density ensures that the weights provide optimal balance and control, improving the overall performance of your snowmobile.

The unique feature of these Dalton Cam Arm Weights is their carbide slugs. These slugs are made of hardened carbide, a material that is highly resistant to wear and tear. This means that the weights will maintain their shape and effectiveness even after prolonged use in the most challenging snow conditions.

Installing these weights is a straightforward process, thanks to their user-friendly design. They simply slide onto the existing cam arms, replacing your original weights. The result is a more balanced and responsive sled, allowing you to tackle any terrain with confidence.

The Dalton Cam Arm Weights Carbide Slugs are not just about performance, they are also about style. The tungsten and carbide materials give them a sleek, sophisticated appearance that sets your snowmobile apart from the crowd. These weights are a testament to the Dalton brand's commitment to quality, durability, and innovation.

Investing in these Dalton Cam Arm Weights Carbide Slugs is an investment in your snowmobiling experience. They will enhance your sled's performance, extend its lifespan, and provide you with the confidence you need to conquer the snow. So why settle for less when you can have the best? Upgrade your snowmobile with Dalton Cam Arm Weights Carbide Slugs today.

1. Improved Performance: Dalton cam arm weights and carbide slugs can help improve your snowmobiles performance by reducing engine wear and improving throttle response.

2. Durability: Carbide slugs are made of a hard, wear-resistant material that can withstand the high-stress environment of a snowmobile engine.

3. Easy Installation: Dalton cam arm weights and carbide slugs are easy to install and do not require any modifications to your snowmobile.

1. Cost: Dalton cam arm weights and carbide slugs can be expensive, especially if you are purchasing them for multiple snowmobiles.

2. Limited Compatibility: Dalton cam arm weights and carbide slugs may not be compatible with all snowmobile makes and models.

3. Potential for Damage: If not installed correctly, Dalton cam arm weights and carbide slugs can cause damage to your snowmobile engine.

Dalton cam arm weights and carbide slugs can be a worthwhile investment for snowmobile enthusiasts looking to improve their vehicle's performance and durability. However, it's important to do your research to ensure compatibility and installation is done correctly to avoid potential damage to your engine.

If you are considering purchasing Dalton cam arm weights and carbide slugs, we recommend doing your research and consulting with a knowledgeable professional to ensure compatibility and proper installation. It may also be worth considering purchasing a compatible product from a reputable manufacturer to ensure quality and performance.

Details:

Installed a new wheel on when we got home. Last big ride, my buddy did a wheelie jump onto parking lot outer wheel popped off, the plastic ripped out and left bearing on shaft after inspection, everything was still there straight except shot kept riding for 400 more miles. In the data 1, data 2, data 3, quay 70 and many more like newer arctic cat Polaris mod cam arms for piped turbo set ups with these screw dalton type adjustment inch standard thread 1/8 hex key or Allen wrench end grams per slug which is 5 total.

625 or more - when I got a bad hole shot, which is all the time these weights roll em down very impressed. Cant add boost without good clutching - I've beat many 17 pound tunes with this perfectly clutched 14. Great set up - these weigh at least so all my Buddy's have needle studs that stick out. These dalton weights are great dont buy a new set because you make more hp now and need weight this fixes it.

Wheels are about 20 bucks a quantity of six gold 6 total pieces modified 1 long set screws tuned 260 hp sidewinder but with stock gearing or when u change to the 17 pound 285 tune - its not heavy enough 2 these slugs per arm, x3 it fixes and holds down around 9000 PMS. I can do custom sizes, let me know if u want screws lengths for a certain weight special application, or tip filler shown in pics whatever remember grind em to smaller size under 7 grams is needed. Again built for the trail more than 500 feet - but they work great that also tune when I added alto of gear and went to 17 pounds these extra heavy slugs with an carbide tip filler hold it down around worked.

I also drill holes in the small chain case 22, 24, etc, gears for lube on top like custom or 2018 updated stock 21 tooth. For dalton quick adjust weights I like the reeving trail friendly quay 70 in a power also make oversize skid frame rail brace 141 TX and added wheel middle these rails are weak. This is the way to go. Big difference.

Changing cam arms sucks - this is way more adjustable I've tried all those other weights cant get much easier to change set up than dalton still better 2 I told him do it again but on the side Head b OK with also make a 4th rear wheel aluminum shaft spacers like apex easy replaceable oem size mag wheels and kit. Call for details and questions special set ups with carbide sticking out even more weight to fill the hexes I have a tip filler custom screw that fills up hole in end sticks amount can be ground into size. I drill these out in the lathe and insert a huge slug of carbide which is alto heavier than steel done bunch snow racing with everyone, have trail machine up to 290hp - studs that stick. Awesome set up.

With custom set ups, can get 8 grams heavier.

specifications clutcdrivbel:

• for makes: Yamaha, Polaris
• brand: Usa 1
• mpn: Usa-proto
• part type: Cam Arm
• country/region of manufacture: Unknown

General clutcdrivbel:

• motors > partsaccessories > snowmobile parts motors > clutchdrive belts snowmobile parts
• in stock: Yes
• condition: New other see details

Offer clutcdrivbel:

• Started: April 4, 2018, 1:25 pm
• best offer: true
• Sold: 0
• bids: 0
• quantity: 1

Shipping clutcdrivbel:

• handling: days
• cost: $0.0
• type: Calculated

Payments clutcdrivbel:

• PayPal

Returns clutcdrivbel:

• policy: no returns

Seller clutcdrivbel:

• zipcode: 49038
• city: Coloma, Michigan

Ratings:

1. Great ! A pleasure to do business with. 03-20-18
2. Great communication. A pleasure to do business with. 04-01-18
3. Fast pay!!! 03-31-18
4. Perfect thanks! 03-11-18
5. nice tools 03-31-18

Usa 1 Is Similar To:

• Usa Dalton Cam Arms Weights Carbide Super Slugs Tunsten Yamaha (99.2% similar) I done a bunch of snow racing with everyone, have trail machine 290HP - and studs that stick out. That way, the carbide is blocked in but it really docent matter as these are permanently glued. And slugs drilled from the hex or Allen side can be inserted in either - when installing screw a standard ...(March 20th, 2018)
• Vintage Nos Best Bell Belts Polaris Yamaha Snowmobile Drive Belt Usa Made (23.9% similar) The belt is still in excellent new condition. Quality made in the Usa...(November 4th, 2022)
• Tarazon Golfdc-ym-p04-usa-pst-510 For 2007-2017 Yamaha Petrol G29 Ydra Jw8-g6201-22 Primary Drive Clutch Parts (19.9% similar) For 2007 -2017 yamaha petrol G29 Hydra JW8-G6201-22 primary drive clutch: : untested, looks physically OK, for parts or repair, sold as is, please see pictures, sale is final...(July 19th, 2025)